Recursion and Fractals - История изменений

Patarakin: /* See Also */

2022-07-21T13:27:25Z

Patarakin: /* Coloring */

2022-07-21T13:26:53Z

Coloring

← Предыдущая версия		Версия от 16:26, 21 июля 2022
Строка 105:		Строка 105:

	====Coloring====		====Coloring====
	~~[[File:Mandelbrot Coloring.gif\|thumb\|150px\|An animation of the Mandelbrot set under iteration.]]~~
	In a basic Mandelbrot set, white is used for a c-values that escape to infinity and black is used for all c-values that do not. This would be the actual Mandelbrot set.		In a basic Mandelbrot set, white is used for a c-values that escape to infinity and black is used for all c-values that do not. This would be the actual Mandelbrot set.

Patarakin: /* Basic Pen Path without Recursion */

2022-07-21T13:25:30Z

Basic Pen Path without Recursion

← Предыдущая версия		Версия от 16:25, 21 июля 2022
Строка 22:		Строка 22:
	The triangle in the center is an equilateral triangle, therefore each of its angles have a measure of 60°.		The triangle in the center is an equilateral triangle, therefore each of its angles have a measure of 60°.

	~~[[File:Equilateral Triangle in Koch Curve.png\|500px]]~~

	Using basic geometry the angles of the rotations the sprite must make can be found.		Using basic geometry the angles of the rotations the sprite must make can be found.

	~~[[File:Sprite Turns in Koch Curve.png\|500px]]~~

	Using this these angles, a [[script]] can be created that draws the first iteration of Koch Curve. Since each line segment is 1/3 the total length of the Koch Curve, the sprite should move 1/3 of the length given each time.		Using this these angles, a [[script]] can be created that draws the first iteration of Koch Curve. Since each line segment is 1/3 the total length of the Koch Curve, the sprite should move 1/3 of the length given each time.

Patarakin в 13:24, 21 июля 2022

2022-07-21T13:24:48Z

← Предыдущая версия		Версия от 16:24, 21 июля 2022
Строка 1:		Строка 1:
	'''[[Recursion]]''' is the process of repeating items in a self-similar way. It can be implemented in [[Scratch]] by making a [[My Blocks\|Custom block]] that runs itself. This can be used to create '''~~{{wp\|~~Fractals}}'''.		'''[[Recursion]]''' is the process of repeating items in a self-similar way. It can be implemented in [[Scratch]] by making a [[My Blocks\|Custom block]] that runs itself. This can be used to create '''Fractals'''.

	A fractal is pattern that produces a picture, which contains an infinite amount of copies of itself. Some well-known specimens are the [[wikipedia:Mandelbrot set\|Mandelbrot set]], the [[wikipedia:Sierpinski triangle\|Sierpinski Triangle]] (also, but less commonly known as the Sierpinski Gasket), and the [[wikipedia:Koch snowflake\|Koch Snowflake]].		A fractal is pattern that produces a picture, which contains an infinite amount of copies of itself. Some well-known specimens are the [[wikipedia:Mandelbrot set\|Mandelbrot set]], the [[wikipedia:Sierpinski triangle\|Sierpinski Triangle]] (also, but less commonly known as the Sierpinski Gasket), and the [[wikipedia:Koch snowflake\|Koch Snowflake]].

Patarakin в 13:24, 21 июля 2022

2022-07-21T13:24:04Z

← Предыдущая версия		Версия от 16:24, 21 июля 2022
Строка 1:		Строка 1:
	~~[[File:Droste.jpg\|thumb\|125px\|The [[wikipedia:Droste effect\|droste effect]] is an example of '''Recursion'''.]]~~
	'''[[Recursion]]''' is the process of repeating items in a self-similar way. It can be implemented in [[Scratch]] by making a [[My Blocks\|Custom block]] that runs itself. This can be used to create '''{{wp\|Fractals}}'''.		'''[[Recursion]]''' is the process of repeating items in a self-similar way. It can be implemented in [[Scratch]] by making a [[My Blocks\|Custom block]] that runs itself. This can be used to create '''{{wp\|Fractals}}'''.

Строка 5:		Строка 4:

	==Creating the Koch Curve==		==Creating the Koch Curve==
	~~{{notUseful\|sounds too technical\|date= Jan 2020}}~~
	The Koch Curve is a fractal that can be created relatively easily in Scratch. It is a piece of the larger fractal, the [[wikipedia:Koch snowflake\|Koch Snowflake]].		The Koch Curve is a fractal that can be created relatively easily in Scratch. It is a piece of the larger fractal, the [[wikipedia:Koch snowflake\|Koch Snowflake]].

	===Understanding Recursion in the Koch Curve===		===Understanding Recursion in the Koch Curve===
	~~[[File:Kochsim.gif\|thumb\|The Koch Curve.]]~~
	The Koch Curve is made of four Koch Curves that are a third of the size of the original Koch Curve. They are they are arranged so that the first and fourth are flat and the middle two point up to make an equilateral that is triangle missing one side.		The Koch Curve is made of four Koch Curves that are a third of the size of the original Koch Curve. They are they are arranged so that the first and fourth are flat and the middle two point up to make an equilateral that is triangle missing one side.

	~~[[File:Recersion in Koch Curve.png\|750px]]~~

	To make it easier to draw, the Koch Curve can be broken down into iterations, each one more complicated than the last. The first iteration is made up of four straight lines. The second iteration contains four copies of the first iteration. The third iteration contains four copies of the second iteration or sixteen copies of the first iteration. As iterations are added it gets more complicated and looks more and more like the real Koch Curve.		To make it easier to draw, the Koch Curve can be broken down into iterations, each one more complicated than the last. The first iteration is made up of four straight lines. The second iteration contains four copies of the first iteration. The third iteration contains four copies of the second iteration or sixteen copies of the first iteration. As iterations are added it gets more complicated and looks more and more like the real Koch Curve.

	~~[[File:Iterations of Koch Curve.png\|500px]]~~

	<!-- ===Implementation in Scratch===		<!-- ===Implementation in Scratch===
Строка 90:		Строка 88:

	==Creating the Mandelbrot Set==		==Creating the Mandelbrot Set==
	~~[[File:Mandelbrot Set.gif\|thumb\|175px\|An animation of zooming in on the Mandelbrot set.]]~~
	The Mandelbrot set is a mathematical fractal defined in the complex plane. It is completely self-similar, meaning that it repeats over and over as one zooms in. The Mandelbrot set was named after its discoverer, Benoit Mandelbrot, and has many close relationships to the [[Wikipedia:Julia Sets\|Julia Sets]].		The Mandelbrot set is a mathematical fractal defined in the complex plane. It is completely self-similar, meaning that it repeats over and over as one zooms in. The Mandelbrot set was named after its discoverer, Benoit Mandelbrot, and has many close relationships to the [[Wikipedia:Julia Sets\|Julia Sets]].

Строка 301:		Строка 299:
	The only difference in its definition from the Mandelbrot set is that c is no longer a point in the complex plane, but rather a complex parameter, which is consistent whichever point you pick. Also, z1 is defined as being the point you pick in the complex plane. The technique above for rendering the Mandelbrot set may be used here again, with the required changes.		The only difference in its definition from the Mandelbrot set is that c is no longer a point in the complex plane, but rather a complex parameter, which is consistent whichever point you pick. Also, z1 is defined as being the point you pick in the complex plane. The technique above for rendering the Mandelbrot set may be used here again, with the required changes.

	~~Here is a gallery of images on the Julia set:~~

	~~<gallery widths=160px perrow=5 caption="Julia Set">~~
	~~File:Julia Set Image1.png\|Julia set for c=-0.835-0.2321i~~
	~~File:Julia Set Image2.png\|Julia set for c=-0.4+0.6i~~
	~~File:Julia Set Image3.png\|Julia set for c=0.285+0i~~
	~~</gallery>~~

	==See Also==		==See Also==
	* [[Recursion]]		* [[Recursion]]

	~~== External Links ==~~
	* [[projects:10068174\|Example of Koch Curve]]
	* [[projects:12194871\|Example of Mandelbrot Set and Julia Set]]

	[[Category:Scripting Tutorials]]		[[Category:Scripting Tutorials]]
	[[Category:Computer Science]]		[[Category:Computer Science]]
	~~[[de:Fraktale]][[hu:Fraktálok]]~~

Patarakin: 1 версия импортирована

2022-07-21T08:33:17Z

1 версия импортирована

← Предыдущая версия		Версия от 11:33, 21 июля 2022
(нет различий)

scratch>Jvvg в 21:38, 6 июня 2022

2022-06-06T21:38:53Z

Новая страница

[[File:Droste.jpg|thumb|125px|The [[wikipedia:Droste effect|droste effect]] is an example of '''Recursion'''.]]
'''[[Recursion]]''' is the process of repeating items in a self-similar way. It can be implemented in [[Scratch]] by making a [[My Blocks|Custom block]] that runs itself. This can be used to create '''{{wp|Fractals}}'''.

A fractal is pattern that produces a picture, which contains an infinite amount of copies of itself. Some well-known specimens are the [[wikipedia:Mandelbrot set|Mandelbrot set]], the [[wikipedia:Sierpinski triangle|Sierpinski Triangle]] (also, but less commonly known as the Sierpinski Gasket), and the [[wikipedia:Koch snowflake|Koch Snowflake]].

==Creating the Koch Curve==
{{notUseful|sounds too technical|date= Jan 2020}}
The Koch Curve is a fractal that can be created relatively easily in Scratch. It is a piece of the larger fractal, the [[wikipedia:Koch snowflake|Koch Snowflake]].

===Understanding Recursion in the Koch Curve===
[[File:Kochsim.gif|thumb|The Koch Curve.]]
The Koch Curve is made of four Koch Curves that are a third of the size of the original Koch Curve. They are they are arranged so that the first and fourth are flat and the middle two point up to make an equilateral that is triangle missing one side.

[[File:Recersion in Koch Curve.png|750px]]

To make it easier to draw, the Koch Curve can be broken down into iterations, each one more complicated than the last. The first iteration is made up of four straight lines. The second iteration contains four copies of the first iteration. The third iteration contains four copies of the second iteration or sixteen copies of the first iteration. As iterations are added it gets more complicated and looks more and more like the real Koch Curve.

[[File:Iterations of Koch Curve.png|500px]]



====Basic Pen Path without Recursion====
The triangle in the center is an equilateral triangle, therefore each of its angles have a measure of 60°.

[[File:Equilateral Triangle in Koch Curve.png|500px]]

Using basic geometry the angles of the rotations the sprite must make can be found.

[[File:Sprite Turns in Koch Curve.png|500px]]

Using this these angles, a [[script]] can be created that draws the first iteration of Koch Curve. Since each line segment is 1/3 the total length of the Koch Curve, the sprite should move 1/3 of the length given each time.

<scratchblocks>
when gf clicked
point in direction (90) // make sure the sprite is pointed right
go to x: (-240) y: (-179) // put the sprite in the lower left corner
erase all // clear graphics from previous runs
pen down // put the pen down for drawing
make the first iteration of the Koch Curve with a length of (480)
pen up // put the pen up so movement afterwards is not recorded

define make the first iteration of the Koch Curve with a length of (length)
move ((length) / (3)) steps // draw a line segment
turn ccw (60) degrees // first turn
move ((length) / (3)) steps // draw a line segment
turn cw (120) degrees // second turn
move ((length) / (3)) steps // draw a line segment
turn ccw (60) degrees // third turn
move ((length) / (3)) steps // draw a line segment
</scratchblocks>

====Adding Recursion====
To add recursion, instead of drawing a line, a smaller Koch Curve can be drawn. When each iteration above one is drawn, it contains four smaller Koch Curves that are one iteration less than it self. For example, when drawing the second iteration you must draw four copies that are 1/3 the size of the first iteration. When the program gets to the first iteration it must draw straight lines. The following code will make the fifth iteration of the Koch Curve:

<scratchblocks>
when gf clicked
point in direction (90) // make sure the sprite is pointed right
go to x: (-240) y: (-179) // put the sprite in the lower left corner
erase all // clear graphics from previous runs
pen down // put the pen down for drawing
make the (5) iteration of the Koch Curve with a length of (480)
pen up // put the pen up so movement afterwards is not recorded

define make the (iteration) iteration of the Koch Curve with a length of (length)
if <(iteration) = [1]> then // is it the first iteration?
move ((length) / (3)) steps // draw a line segment
else
make the ((iteration) - (1)) iteration of the Koch Curve with a length of ((length) / (3)) // make a smaller Koch Curve
end
turn ccw (60) degrees // first turn
if <(iteration) = [1]> then // is it the first iteration?
move ((length) / (3)) steps // draw a line segment
else
make the ((iteration) - (1)) iteration of the Koch Curve with a length of ((length) / (3)) // make a smaller Koch Curve
end
turn cw (120) degrees // second turn
if <(iteration) = [1]> then // is it the first iteration?
move ((length) / (3)) steps // draw a line segment
else
make the ((iteration) - (1)) iteration of the Koch Curve with a length of ((length) / (3)) // make a smaller Koch Curve
end
turn ccw (60) degrees // third turn
if <(iteration) = [1]> then // is it the first iteration?
move ((length) / (3)) steps // draw a line segment
else
make the ((iteration) - (1)) iteration of the Koch Curve with a length of ((length) / (3)) // make a smaller Koch Curve
end
</scratchblocks>

==Creating the Mandelbrot Set==
[[File:Mandelbrot Set.gif|thumb|175px|An animation of zooming in on the Mandelbrot set.]]
The Mandelbrot set is a mathematical fractal defined in the complex plane. It is completely self-similar, meaning that it repeats over and over as one zooms in. The Mandelbrot set was named after its discoverer, Benoit Mandelbrot, and has many close relationships to the [[Wikipedia:Julia Sets|Julia Sets]].

===Understanding the Definition===
In its definition, the Mandelbrot uses complex numbers. A complex number is the sum of a real number and an imaginary one, with an imaginary number simply being the square root of a negative number. Since that can not be taken, the square root of -1 is assigned the value i. For example, 3+3i is a complex number.

The Mandelbrot set is defined as all c values in the complex plain which are bounded under iteration in the following equation:

zn + 1 = zn2c

First, one starts with a z value of c (i.e. z1 = c). Then, when one puts that z back into the equation, it becomes z^2+c. That z is then taken and put back through the equation over and over. This is called iteration.

For example, let c=1. The value z then becomes 1. Once 1 is put back into the equation, the equation becomes 1^2+1, which equals 2. Once 2 is put back in, it becomes 2^2+1, or 5. Once 5 is put back in, it becomes 26. That sequence escapes to infinity and therefore c=1 is not part of the Mandelbrot set. Meanwhile, the sequence c=-1 gives 0, -1, 0, -1, 0, ect..., is bounded and so belongs to the Mandelbrot set.

It has been proven that if any sequence contains a complex value that is outside a distance of 2 from the origin, it will escape to infinity.

====Coloring====
[[File:Mandelbrot Coloring.gif|thumb|150px|An animation of the Mandelbrot set under iteration.]]
In a basic Mandelbrot set, white is used for a c-values that escape to infinity and black is used for all c-values that do not. This would be the actual Mandelbrot set.

In most Mandelbrot sets, though, colors are used to help depict the Mandelbrot set or make it more art-orientated. Colors are not defined through an equation, but rather through the last iteration before escaping a distance of two from the origin. The iteration is then assigned a color of the creator's preference. Color can also apply to the rate of the equation reaching infinity.



====Creating the Variables====
Due to the fact that Scratch does not directly support mathematics in the complex plain, a simple workaround has to be used. Each complex number will be defined as two [[variable]]s, the real part, and the complex part. And since there will be operations based on the complex numbers, two complex numbers will be needed, or four variables. For the tutorial, these names will be used:

* <sb>(real 1)</sb>
* <sb>(real 2)</sb>
* <sb>(imaginary 1)</sb>
* <sb>(imaginary 2)</sb>

Along with that, a variable Best Fit will be used to figure out the color to be used when coloring a complex value:

* <sb>(best fit)</sb>

====Coding====
To start, a base of clones is needed to render a full screen due to the computing power needed to render the Mandelbrot set:

<scratchblocks>
when gf clicked
hide//so that this sprite and its clones do not show
set y to (180)
erase all//preparing the scene for the Mandelbrot set
repeat (12)
create clone of (myself v)
change y by (-1)//this makes it so that clones do not overlap
end
</scratchblocks>

Next, it is important to give the clones a skeleton:

<scratchblocks>
when I start as a clone
set pen size to (1.5)//any other size will appear transparent
set x to (-180)//the left hand side of the Mandelbrot set
repeat ((360) / (12))//12 clones and each gets 30 rows on the screen to render
repeat (360)//360 pixels will be the width of the Mandelbrot set once rendered
... //this is where each point will be rendered
end
change y by (-12) //the clone finished a row and moves to another
set x to (-180)
end
</scratchblocks>

Although this is a functional script, it will take a while to render. For speed preferences, a custom block will be inserted:

<scratchblocks>
when I start as a clone
set pen size to (1.5)
set x to (-180)
repeat (30)
repeat (60)
forced iteration::custom//renders 6 points without a screen refresh for speed benefits
end
change y by (-12)
set x to (-180)
end

define forced iteration//make sure this runs without screen refresh
repeat (6)//here is where it'll be rendering points now
end
</scratchblocks>

As noted above, it is important that the custom block "forced iteration" runs without a screen refresh or else all the benefit of extra speed will be lost.

Anyway, now that that is coded, a skeleton will be created for sampling a point and figuring out whether or not it is part of the Mandelbrot set:

<scratchblocks>
define forced iteration//make sure it runs without screen refresh
repeat (6)
set [real 1 v] to ((x position) / (90))//90 pixels to the right is the equivalent of 1
set [imaginary 1 v] to ((y position) / (90))//90 pixels upwards is the equivalent of i
if <([sqrt v] of (((real 1) * (real 1)) + ((imaginary 1) * (imaginary 1)))) < (2.15)> then
test for legibility at r: (real 1) i: (imaginary 1)::custom
set pen color::custom
pen down//drawing the point
pen up
end
change x by (1)//moving onto another point
end

define test for legibility at r: (real) i: (imaginary)//this is where a point will be tested if it is part of the Mandelbrot set or not

define Set Pen Color
// this is where the color will be picked depending on the variable 'Best Fit'
</scratchblocks>

Now here is where the mathematics of the Mandelbrot set comes into play. In the Test for Legibility custom block, someone has to take a complex number, apply the equation which defines the Mandelbrot set, and repeat if it is still within a distance of 2 from the origin:

<scratchblocks>
define Test for legibility at r: (real) i: (imaginary)
set [best fit v] to (-1)
repeat until <<(best fit) = (20)> or <([sqrt v] of (((real 1) * (real 1)) + ((imaginary 1) * (imaginary 1)))) > (2)>>
change [best fit v] by (1)//the complex number has survived one iteration
set [real 2 v] to ((((real 1) * (real 1)) - ((imaginary 1) * (imaginary 1))) + (real))
set [imaginary 2 v] to (((2) * ((real 1) * (imaginary 1))) + (imaginary))
set [real 1 v] to (real 2)//setting the scene for another iteration
set [imaginary 1 v] to (imaginary 2)
end
</scratchblocks>

Up above, it may be noticed that the repeat continues until the complex number is found not to be part of the Mandelbrot set, or until it has iterated 20 times. That 20 can be changed to whatever one wants, with higher numbers producing higher quality; though the higher the number, the more lag will be caused.

To complete the Mandelbrot set, colors need to be implemented:

<scratchblocks>
define set pen color
if <(best fit) = (-1)> then
set pen color to [#000] // this point is already outside a distance of 2 from the origin
else
if <(best fit) = (20)> then
set pen color to [#FFF] // this point is a solution to the Mandelbrot set
else
set pen color to (50) // this complex number is not a solution, but survives several iterations
set pen shade to (((0) - (best fit)) * (5))
end
end
</scratchblocks>

Those colors may be changed to one's wishes.

====Final Product====

In the end, this is all the code used to draw the Mandelbrot set (scroll to see all of the code):

<scratchblocks>
when gf clicked
hide
set y to (180)
erase all
repeat (12)
create clone of (myself v)
change y by (-1)//this makes it so that clones do not overlap
end

when I start as a clone
set pen size to (1.5)
set x to (-180)
repeat (30)
repeat (60)
forced iteration::custom
end
change y by (-12)
set x to (-180)
end

define forced iteration//remember, run this without screen refresh!
repeat (6)
set [real 1 v] to ((x position) / (90))
set [imaginary 1 v] to ((y position) / (90))
if <([sqrt v] of (((real 1) * (real 1)) + ((imaginary 1) * (imaginary 1)))) < (2.15)> then
test for legibility at r: (real 1) i: (imaginary 1)
set pen color
pen down//drawing the point
pen up
end
change x by (1)//moving onto another point
end

define test for Legibility at r: (real) i: (imaginary)
set [best fit v] to (-1)
repeat until <<(best fit) = (20)> or <([sqrt v] of (((real 1) * (real 1)) + ((imaginary 1) * (imaginary 1)))) > (2)>>
change [best Fit v] by (1) // the complex number has survived one iteration
set [real 2 v] to ((((real 1) * (real 1)) - ((imaginary 1) * (imaginary 1))) + (real))
set [imaginary 2 v] to (((2) * ((Real 1) * (Imaginary 1))) + (Imaginary))
set [real 1 v] to (Real 2)
set [imaginary 1 v] to (imaginary 2)
end

define set pen color
if <(best fit) = (-1)> then
set pen color to [#000]//this point is already outside a distance of 2 from the origin
else
if <(best fit) = (20)> then
set pen color to [#FFF]//this point is a solution to the Mandelbrot set
else
set pen color to (50)//this complex number is not a solution, but survives several iterations
set pen shade to (((0) - (best fit)) * (5))
end
end
</scratchblocks>

==Julia Set==
The Julia set is a series of equations that are mathematical fractals, and that is defined very similarly to the Mandelbrot set. The official equation is:

ƒc(z) = z2 + c

The only difference in its definition from the Mandelbrot set is that c is no longer a point in the complex plane, but rather a complex parameter, which is consistent whichever point you pick. Also, z1 is defined as being the point you pick in the complex plane. The technique above for rendering the Mandelbrot set may be used here again, with the required changes.

Here is a gallery of images on the Julia set:

<gallery widths=160px perrow=5 caption="Julia Set">
File:Julia Set Image1.png|Julia set for c=-0.835-0.2321i
File:Julia Set Image2.png|Julia set for c=-0.4+0.6i
File:Julia Set Image3.png|Julia set for c=0.285+0i
</gallery>

==See Also==
* [[Recursion]]

== External Links ==
* [[projects:10068174|Example of Koch Curve]]
* [[projects:12194871|Example of Mandelbrot Set and Julia Set]]

[[Category:Scripting Tutorials]]
[[Category:Computer Science]]
[[de:Fraktale]][[hu:Fraktálok]]

← Предыдущая версия		Версия от 16:27, 21 июля 2022
Строка 306:		Строка 306:

	[[Category:Scripting Tutorials]]		[[Category:Scripting Tutorials]]
	~~[[Category:Computer Science]]~~